A-A-2851C
Table 5
|
Type II, Class 2, Style C |
|||||||||
|
Pile |
Backing Yarn |
Pile Yarn Content |
Fabric Weight/Square Yard Including backing |
||||||
|
Thickness |
Tolerance +/- |
Size Warp Filling |
Percent |
Minimum |
|||||
|
mm |
Inch |
mm |
Inch |
Cotton |
Polyester |
Acrylic |
Modacrylic |
Kg. |
Ounces |
|
5.8 |
29/128 |
0.8 |
1/32 |
20/2 |
10/1 |
65 |
35 |
0.5 |
17-1/4 |
|
9.5 |
3/8 |
0.8 |
1/32 |
20/2 |
10/1 |
65 |
35 |
0.7 |
24/1/4 |
3.3 Type III- Paint Roller Tray. Paint trays shall have a minimum width of 11” and shall have a capacity of not less than 1 gallon and a working capacity of not less than 1 quart. The tray shall be tapered in depth and of ribbed, studded or dimpled construction. The trays shall have a leg design suitable for use with ladders or planks. When filled to working capacity and hooked on a ladder or plank, the tray shall not distort or buckle.
3.3.1 Class 1 Metal Paint Roller Tray. Paint trays shall be made from corrosion resistant metal or metal made corrosion resistant by electro-plating. The finished tray shall have all burrs, sharp edges and loose or lifted plating.
3.3.2 Class 2 Plastic Paint Roller Tray. Paint trays shall be made from polypropylene of equitable plastic. The finished tray shall have all spurs and runners removed.
3.4 Type IV- Paint Bucket Grill. The bucket grill shall be of one-piece corrosion resistant metal or be corrosion resistant by electro-plating. The grill shall be designed for hooking on the rim of a 5 gallon pail at an angle suitable for loading and spreading paint on the paint roller and for rolling off excess paint from the roller. The grill shall clear the bottom of the pail sufficiently to allow the roller to be rotated around the entire bottom of the pail. The grill shall be suitable for use with 9” rollers and shall not buckle under normal use.
3.5 Type V- Paint Mitt. The paint mitt shall be designed with rounded corners, a thumb sheath, and have an elastic wristlet made of true 1 by 1 rib-knit seamless cotton tubing. The whole mitt shall be pieced and sewn with nylon thread, with not more than three pieces of material on either side. All seams shall be backstitched. The mitt shall be a minimum of 9-1 /2” in length and 5-1/2” +/- 1/4” in width at its widest point (not including the thumb). The thumb shall be 2-1/2” +/- 1/4” in width. Two polyethylene liners shall be furnished and packaged with each mitt.
3.5.1 Class 1 Lambskin Paint Mitt. Paint mitt shall be made from chrome-tanned shearling lambskin constructed so that the wool shall be 3/4” +/- 1/4” long, and shall remain on the outside of the mitt.
3.5.2 Class 2 Polyester Paint Mitt. Paint mitt shall be made from knotted, crimped polyester on a 100% polyester backing. The pile height shall be 3/4” +/- 1/4” long.
3.6 Type VI- Paint Kits. The paint kit shall contain a roller frame (Type I, Size 2, or 3), a roller cover (Type I, Class2, Style A), and a paint tray (Type III, Class 1).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business